FermZilla Conical Fermenter (7.1 gal/27 L) Ferment, Condition, Carbonate in One
The new and improved FermZilla in 27L brought to you by the critical minds and engineers behind the original Fermentasaurus Gen 1. Although the original Fermentasaurus was revolutionary at the time of its conception, there’s always room for improvement. This is partly due to the strong community of Fermentasaurus users who have helped push for an improved conical unitank.
The FermZilla is the perfect option for brewers that want all the advantages of a conical fermenter without the price tag of a full blown stainless steel unit. It allows you to dump trub, harvest yeast, and with the addition of the FermZilla Pressure Kit, you can carbonate and serve – all in one vessel! The clear PET tank allows you to visually monitor fermenation activity and is pressure rated to 2.4 Bar (34.8 psi), which means you can ferment under pressure, reducing ester and fusel alcohols in your finished beer. This also gives the ability to perform pressure transfers. If you prefer to move your finished beer to a keg or other vessel, you can do so with little to no oxygen exposure.
New and Improved:
1. Larger Dump Valve – 3″ butterfly dump valve is more resistant to clogging from large amounts of trub
2. Larger Opening – 4.75″ top port opening allows for easier cleaning
3. Less Headspace – more appropriately sized for 5-gallon batches. Purging the headspace of oxygen is easier and more effective.
- FermZilla 27L Tank with Butterfly Dump Valve (Pre-Assembled & Attached)
- Reinforced Stainless Steel Stand
- Top Lid with PRV (35 psi)
- 1000 ml Collection Container & Lid
- 3-Piece Airlock
- Graduation Sticker
- Adhesive Thermometer
- Strap Wrench
- Spare Seals
- 27 L (7.1 gal) Total Volume
- Pressure Rated to 2.4 Bar (34.8 psi)
- Height in Stand – 28.3″
- Height w/ Airlock – 32.7″
- Tank Diameter – 13.9″
- Diameter in Stand – 15.7″
Please note: when using the FermZilla under pressure, you must perform a water pressure check to ensure your connections are leak proof. To do this, fill your FermZilla up with water, apply at least 15 psi pressure, and check for leaks around all caps and threads.
Out of stock